12V Battery Charger Range

SDE PowerTrain is proud to showcase our range of PowerTrain battery chargers. Browse below to get a better idea of what we have to offer and contact us for a quote. All the stage diagrams are included in the Product Pamphlet and Manuals page.

PBC8-12-16 image.JPG

PBC8A/PBC12A/PBC16A

New!
8A/12A/16A charger range for 6/12/24V batteries

  • Button-less automatic battery voltage selection.  This charger is suitable for 6 Volt, 12 Volt and 24 Volt DC automotive batteries.  

  • Button-less automatic battery chemistry selection, suitable for GEL, LEAD ACID, AGM, and Maintenance Free ,Calcium types of automotive batteries.

  • Large easy to read LED display shows the charging stage status, volts and amps output and battery capacity.

  • Inbuilt protection systems for safe operation.

  • Zero volt start up, enabling recovery and charging of a completely deep discharged battery.  But any load must be removed from the rechargeable battery.

  • Internal or external short circuit, reverse connection, over temperature, overload and over voltage protection.

  • For these products, the charger can be hung with a hook, and the power cable can be wound on the back.

PBC168SL

New Addition, please see Product Pamphlet page for more information.

The 6V/12V/24V 16 Amp 8 Stage Automatic Selection Smart Battery Chargers are designed to effectively charge most battery  types; Lead-acid, Calcium, maintenance free, Gel and AGM. They have an all new feature that allows the battery charger to automatically select the battery voltage charge mode and the battery chemistry. The specially designed charging system uses new technology to automatically select the correct voltage setting for the size of the battery in order to charge all batteries. The new design of this unit has a 13.5V DC power source mode, and it can be used on many 12V household appliances.

PBC168SL.jpg
6V-12V Charger (PTC12V6A7S-6-12).jpg

PTC12V6A7S-6/12

New Product! See Product Pamphlet page for more product information.

The new PowerTrain PTC12V6A7S-6/12 battery charger is a sophisticated IP65 water-approval 7 stage charger, utilizing switch mode and fully automatic computer system control, designed to charge most 6 volt or 12 volt Gel, Lead Acid or Calcium batteries.

PTC12V1.6A

12V1.6A Charger

  • 5 stage charging system

  • Input voltage: 185-255V AC

  • 0 Volt start charing - can charge batteries that have been discharged to 0V

  • Boost and absorption voltage: 14.7V

  • Float stage: 13.8V

  • Reverse polarity, short circuit, overload protection

PTC1.6A.jpg
PTC12V2.5A.jpg

PTC12V2.5A

12V2.5A Charger

  • Fully automatic 5 stage charging system

  • Short circuit, reverse polarity and overload protection

  • LED Charging status indicators

  • Suitable for most 12V batteries

  • Starts charging batteries from 0V

PTC12V4A

12V4A Charger

  • Fully automatic 5 stage charging system

  • Short circuit, reverse polarity and overload protection

  • Charges from zero volts

  • LED Charging status indicators

  • Suitable for most 12V batteries

PTC12V4A.jpg
PTC12V4AL.jpg

PTC12V4AL

12V4A Charger with LED Screen

  • Fully automatic 5 stage charging system

  • Short circuit, reverse polarity and overload protection

  • Charges from zero volts

  • LED screen displays battery charge status

  • Suitable for most 12V batteries

PTC12V12A7SL

7 Stage12V12A Charger

  • Output: 12V12A

  • Fully Automatic 7 stage charging

  • Compatible with Gel, Calcium, Deep Cycle, Lead Acid and AGM batteries

  • Internal charger temperature monitoring and power output control

  • LED display showing battery capacity status, output voltage and warning indicators

  • Zero volt minimum battery start up-can charge a completely flat battery

  • Over charging, short circuit and over temperature protection

  • Reverse polarity protection with visual alerts

PTC12V12A7SL.JPG
PTC20AL (new).jpg

PTC20/30/40AL

7 Stage 20/30/40A Charger with Lithium charging mode

  • Fully automatic voltage selection and 8 stage charging system.

  • Suitable for charging 6, 12 and 24V Gel, Lead Acid, AGM, Calcium and 12V only Lithium (via MODE button) types of automotive batteries. This charger must be manually selected to charge 12V Lithium type batteries.  Do not attempt to recharge dry cell batteries.

  • Large easy to read LED display shows the charging stage status, volts and amps output and battery capacity.

  • Zero Volt battery charging (disconnected battery), enabling recovery and charging of a completely deep discharged battery. But any load must be removed from the rechargeable battery.

  • Inbuilt protection systems for safe operation.

  • 13.5V DC power supply for 20A, 30A and 40A output currents with overload and short circuit protection.

  • Faulty Battery indicators for if the battery being charged is completely dead and cannot be charged. Depending on what battery is being charged; 6V or 12V or 24V LED will flash if battery is faulty.

PBC88S

8 Stage 12V8A Battery Charger

  • Able to test battery condition while charging (Faulty battery LED indicator and in built buzzer)

  • Automatic selectable charge cycle for Gel, AGM, Lead-acid batteries, also manual selectable charge cycle for Calcium, Calcium-Calcium batteries provides the best possible charge for each battery type

  • Complete charging cycle including desulphation/pulse, soft start, bulk, absorption, analysis, boost (equalisation), float, and maintenance to fully charge the battery and prolong battery life

  • Aptitude overcharging protection prevents the battery being damaged due to overcharging

  • Reverse polarity protection

  • Short circuit protection

PBC88S.jpg
SBC10ML.png

SBC10ML

7 Stage 10A battery charger with automatic voltage selection for 6V/12V/24V batteries

  • Fully automatic voltage and battery type charging.

  • 7 stage charging system.

  • Suitable for charging 6V, 12V, 24V Gel, Lead Acid, AGM and Maintenance Free Calcium types of flooded automotive batteries. This charger is not suitable for dry cell batteries.

  • Large and easy to read LED display shows the charging stage status, volts and amperage output, and notifies of battery fault or reverse polarity connections.

  • Zero volts battery charging (disconnected battery), enabling recovery and charging of a completely discharged battery.

  • Inbuilt protection systems for safe operation.

  • Voice output for confirming various functions such as determined output voltage.

 

Specialist Battery Chargers

6V,12V,24V, DC-DC chargers, chargers with solar input and more!

SDE PowerTrain is proud to showcase our full product inventory, including our customer favorites. Browse below to get a better idea of what we have to offer. Are you having trouble deciding on a purchase? Give us a call, one of our product experts will be happy to lend you a hand and answer any questions you may have.

 

PTMC340

  • Fully automatic 8 stage charging system for 240VAC charging input, 40A solar input charging and 30A DC-DC charging output

  • Suitable for charging 12V Gel, Lead Acid, AGM, and Maintenance Free Calcium types of flooded automotive batteries.

  • Large easy to read LED display shows the battery charging   status, volts and amps output, operation mode and notifies of battery fault. Also that can display load current status when it connected to load current test sensor unit.

  • Zero Volt battery charging, enabling recovery and charging of a completely deep discharged battery.

  • Automatic input selection between AC, DC or Solar power sources.

  • Removable LED display doubles as a remote controller with 5M of connection cable.

  • Inbuilt protection systems for safe operation.

PTMC340.jpg